TUBESCA-COMABI GENERIS 300 Manual Del Usuario página 41

3-1-3 –Two 1.50m extensions assembly
• Insert the extension into the two pins provided on the base.
• Connect each extension with the two « Omega » type split pins code 80470.
3-1-4 –Crosspieces assembly
• Install the two crosspieces facing each other on the spring fingers.
• Position the crosspieces so that the curve faces outwards to facilitate installation of the
platform.
• When installing the crosspieces, make sure that the spring slats are functioning properly.
106-A000035744 - ind.0 – 11/2021
41