TUBESCA-COMABI GENERIS 300 Manual Del Usuario página 51

1. Insert the two castor wheels into the lower tubes of the « stair kit » extension and pin the 2 castor
wheels together.
2. Position the G300 base on the "stair kit".
3. Install one 1.50m extension and secure with split pins.
4. Install 2 crosspieces of the stair kit.
5. Follow the assembly process from §2-1-6 to §2-1-9.
Clip the lower section
and tighten the clamp at
the other end.
If staircase pitch does not correspond to the length of the scaffolding and the
castor wheel base is unclear, install massive wedge to widen a stair step and
ensure that it is stable and strong enough. Ensure that the castor wheel
106-A000035744 - ind.0 – 11/2021
brakes are functioning properly.
Curved side
inwards.
51