TUBESCA-COMABI GENERIS 300 Manual Del Usuario página 42

3-1-5 – Stabilisers assembly
• Secure the stabiliser clamp just below rung no. 3
• Verifying whether the stabiliser is touching the ground.
• Lock the stabiliser clamp to the upright using a wing nut.
• Repeat this process 4 times.
3-1-6 – Temporary box platform assembly for installation assistance
• Position the platform on the second rung of the ladder (platform height 1.00m). Note that
the base rung is not considered as a "ladder" rung
• Ensure that the anti-lift devices of the platform are locked.
106-A000035744 - ind.0 – 11/2021
•
Make sure the wing
nut is locked.
Check "length" and "width"
according to table §3-3.
42