Battery Replacement - Southwire 23030T MaintenancePRO Instrucciones De Uso

Operation cont.

Battery Replacement

WARNINGS:
To avoid electric shock, remove the test leads from
the meter before removing the battery cover.
1. When the battery is depleted, the
Replace the battery immediately.
2. Use a small flat bladed screwdriver to loosen the one screw.
3. Remove the battery cover.
4. Replace the battery with
one 9 volt battery.
5. Install the battery cover
and tighten the screw.
WARNING:
To avoid electric shock, do not operate the meter
until the battery cover is securely fastened to the meter.
symbol will appear on the LCD display.
screw
15
Specifications
Function Range
60.00A
AC Current (50/60Hz)
600.0A
1000A
Maximum Input: 1000A AC rms or 1000A DC
AC current bandwidth: 50 to 60Hz, True RMS response
All AC current ranges are specified from 5% to 100% of range
Function Range
6.000V
AC Voltage
(Autoranging)
60.00V
600.0V
1000V
Input Protection: 1000V AC rms or 1000V DC
AC voltage bandwidth: 50 to 60Hz, True RMS response
All AC voltage ranges are specified from 5% to 100% of range
Function Range
600.0mV
DC Voltage
(Autoranging)
6.000V
60.00V
600.0V
1000V
Input Protection: 1000V DC or 1000V AC rms
All AC voltage ranges are specified from 5% to 100% of range.
Function Range
600.0
Resistance
(Autoranging)
6.000k
60.00k
600.0k
6.000M
60.00M
Input Protection: 600V DC or 600V AC rms
Resolution Accuracy ±
(% of reading + digits)
10mA ±(2.5% +8 digits)
0.1A ±(2.5% +8 digits)
1A ±(3.0% +3 digits)
Resolution Accuracy ±
(% of reading + digits)
1mV ±(1.5% +5 digits)
10mV ±(1.5% +5 digits)
0.1V ±(1.5% +5 digits)
1V ±(3.0% +8 digits)
Resolution Accuracy ±
(% of reading + digits)
0.1mV ±(1.0% +20 digits)
1mV ±(1.2% +3 digits)
10mV ±(1.2% +3 digits)
0.1V ±(1.2% +3 digits)
1V ±(1.5% +3 digits)
Resolution Accuracy ±
(% of reading + digits)
0.1 ±(1% +4 digits)
1 ±(1.5% +2 digits)
10 ±(1.5% +2 digits)
100 ±(1.5% +2 digits)
1k ±(2.0% +5 digits)
10k ±(3% +8 digits)
16