Media Selective Pairing - A2Dp Profile - Sena Intercom 30K Manual Del Usuario

Phone Selective Pairing
Phone Button = Hold 5s
Phone Button = Tap 1x
"Phone selective pairing"
LED status = Blue flashing lights indicate device is now discoverable.
2. With your mobile phone in Bluetooth-pairing mode, select the headset in the list of devices
detected.
3. If your mobile phone asks for a PIN, enter 0000.
4.3.2.

Media Selective Pairing - A2DP Profile

1. Execute Media Selective Pairing by holding down the Phone Button for 5 seconds. Tap the
Jog Dial once within 2 seconds.
Media Selective Pairing
Phone Button = Hold 5s
Jog Dial = Tap 1x
"Media selective pairing"
[icons]
[icons]
[voice prompt]
[icons]
[icons]
[voice prompt]