Fm Station Guide (Default: Enable); Ambient Mode; Voice Command; Voice Command (Default: Enable) - Sena Intercom 30K Manual Del Usuario

The RDS AF setting can be found in the settings menu, accessible through Sena Device Manager or
Sena Smartphone App. Please refer to Section 3.6: "Downloadable Sena Software" for more details.
When radio station signals get too weak for a good reception, with RDS AF enabled, the Sena radio
receiver re-tunes to a station with better reception. If RDS AF is disabled, you'll have to find stronger
stations manually.
9.8.

FM Station Guide (Default: Enable)

The FM Station Guide setting can be found in the settings menu, accessible through Sena Device
Manager or Sena Smartphone App. Please refer to Section 3.6: "Downloadable Sena Software" for
more details.
When FM Station Guide is enabled, FM station frequencies are given by voice prompts as you select
preset stations. When FM Station Guide is disabled, the voice prompts on FM station frequencies will not
be given as you select preset stations.
10.

Ambient Mode

You can hear the ambient sound outside of your helmet by activating the Ambient Mode. To activate the
Ambient Mode, press the Ambient Mode Button twice which is placed on the bottom of the clamp unit.
To deactivate the Ambient Mode, press the Ambient Mode Button twice again.
Ambient Mode
START/STOP AMBIENT MODE [icon] = Ambient Mode Button - Tap 2x
Note: The Ambient Mode has higher priority than mobile phone, so you cannot make or answer phone
call, listen to music, or have an intercom conversation if the Ambient Mode is activated.
11.

Voice Command

The voice command of the
You can control the
function works only with English commands.
headset allows you to operate certain operations by simply using your voice.
headset completely handsfree using the voice recognition. The voice command