Gps Pairing - Sena Intercom 30K Manual Del Usuario

LED status = Red flashing lights indicate device is now discoverable.
2. With your mobile phone in Bluetooth-pairing mode, select the headset in the list of devices
detected.
3. If your mobile phone asks for a PIN, enter 0000.
4.4.

GPS Pairing

1. Execute GPS Pairing by holding down the Jog Dial for 5 seconds. Within 2 seconds, tap the
Phone Button once to hear the voice prompt, "Second mobile phone pairing". Again within 2
seconds, tap the Phone Button to hear the voice prompt, "GPS pairing".
GPS Pairing
Jog Dial = Hold 5s
Phone Button = Tap 1x
"Second Mobile Phone pairing"
Phone Button = Tap 1x
[voice prompt]
"GPS pairing"
LED status = Green flashing lights indicates device is now discoverable.
2. With your mobile phone in Bluetooth-pairing mode, select the headset in the list of devices
detected.
3. If your mobile phone asks for a PIN, enter 0000.
[icons]
[icons]
[voice prompt]
[icons]