Operating The Appliance; Switching On; Connecting The Grill Elements; Switching Off - Gaggenau VR 414 111 Instrucciones De Uso

Operating the appliance

S witching on
O p e r a t i n g t h e a p p l i a n c e
The two grill elements can be controlled separately. This
means that you can grill foods that require different
temperatures at the same time. If required, you can
connect the two grill elements together and set the
same grill setting at the same time for both of them.
Push in the control knob and turn it to the required grill
setting. If you do not want to cook across the entire grill
zone, switch on the front or rear grill element only.
The illuminated rings behind the control knobs flash
while the appliance is heating up. Once the food
reaches the selected grill setting, the illuminated rings
light up. The preheating phase at grill setting 12 takes
approximately 15 minutes.

Connecting the grill elements

Note: The two grill elements can be controlled at the
same time using a control knob.
1 Push in any control knob and turn it to the
g position.
2 Turn other control knob to the required grill setting.
This grill setting is applied for both grill elements.
The illuminated rings behind the control knobs flash
while the appliance is heating up. Once the food
reaches the selected grill setting, the illuminated
rings light up. The preheating phase at grill
setting 12 takes approximately 15 minutes.
3 Only put the food in the grill once it has finished
preheating.
To control individual grill elements again, turn the
control knob from the g position to any of the grill
settings.

Switching off

Turn the control knobs to 0.
m
Warning – Risk of burns!
When the appliance cover is closed, this leads to a
build-up of heat. Only operate or switch on the
appliance when the appliance cover is open. Do not use
the appliance cover for keeping warm or setting down.
Only close the appliance cover once the appliance has
cooled down.
Caution!
Damage to the appliance
Remove spilled liquids before opening the appliance
cover.

Residual heat indicator

The luminous discs behind the control knobs flash after
switching off, to indicate that the appliance has still not
cooled down to such an extent that it can be touched
safely.

Overheating protection

To protect the appliance and the furniture, the grill
switches the heating elements off automatically when
overheated. After having cooled down, the appliance
switches on again.

Using the cast iron roasting pan

The cast iron roasting pan is ideal for preparing finely
chopped food, liquids, vegetables, desserts and egg-
based dishes.
The cast iron roasting pan is placed on the rear grill
element once you have removed the wire rack from it.
You can grill other food on the front wire rack at the
same time.
Additional cast iron roasting pans can be ordered as
optional accessories from your specialist retailer.
Note: Leave the lava stone tray and the lava stones in
the grill, even when using the cast iron roasting pan.
How to grill using the cast iron roasting pan
1 Remove the rear wire rack.
2 Carefully place the cast iron roasting tray onto the
rear grill element.
3 Turn the control knob for the rear grill element to
the required grill setting.
4 Wait until the preheating has ended and the
illuminated ring behind the control knob lights up
permanently.
5 Lightly brush the cast iron roasting pan with oil and
place the food in the pan.
Operating the appliance
en
9