Tabla de contenido
Publicidad
Editing a Method File
5. Enter the number of the method that will be over-written and press
Enter. Alternatively, the
number.
6. The display will request confirmation by pressing Enter again. Once
the copy is completed, the display will return to the Main Operating
Menu.
To Delete a Method
1. Press Edit.
2. Press the
key three times to get to the Delete Method field.
3. Enter the number of the method to be deleted and press Enter.
Alternatively, the
number.
4. The display will request confirmation by pressing Enter again. Once
the method is deleted, the display will return to the Edit screen.
To Delete all Methods
1. Press Edit.
2. Use the
key to get to the Clear All Methods field press Enter.
3. The display will request confirmation by pressing Enter again. Once
the methods are deleted, the display will return to the Edit screen.
Gradient programming is achieved by editing a gradient method in Pump
A which is used to control Pump B. Refer to the edit method and edit
program screens in Figure 8 and Figure 9 for field orientation and layout.
Figure 8 Edit Screen
Figure 9 Method File Screen
Select Method File
Press Edit on Pump A and with the cursor on Modify Method, select a
program to edit by entering a value of 00 to 25 then pressing Enter. The
method number can also be input by using the
increment or decrement. In addition to selecting a program, pressing
Edit also allows you to copy, delete, or clear all programs.
15
and
keys can also used to input the
and
keys can also be used to input the
and
keys to
Publicidad
Tabla de contenido
