Varian 212-LC Manual Del Usuario página 6

Purge Valve
Waste Line
Pump A
Outlet Port
1/16" Crossover Tube
Pump A Outlet
Check Valve
1/16" Transfer Tube
Pump B
Outlet Port
1/16"
Crossover Tube
Pump B Inlet
Check Valve
1/16" Transfer Tube
Outlet Port
Figure 1 Varian 212-LC Chromatography Pump HPLC System, Front View
5. Using the 0.005" ID PEEK® tubing provided, cut two lengths of
tubing to connect each pump outlet port to one each of the mixer
inlet ports.
6. Mount the mast assembly (Kit No. 03-935574-91) on either side of
the pumps as shown in Figure 3 and Figure 4.
7. Mount the mixer on the mast as shown and connect the 0.005"
PEEK tubing to the inlet ports of the mixer.
8. Plug in the power cord.
9. Connect Pump A to Pump B using the RS232 cable provided in the
accessory kit. The RS 232 cable connects to the RS232 output on
Pump A and the RS 232 input on Pump B (Figure 2).
4
Purge Valve