Work And Safety Instructions; General Safety; Mechanical Safety - Festo 8065075 Manual De Usuario

5

Work and safety instructions

5.1

General safety

•
Trainees should only work with the circuits under the supervision of an instructor.
•
Observe the specifications included in the technical data for the individual
components, and in particular all safety instructions!
•
Wear personal safety equipment (safety glasses, safety shoes) when working on
circuits.
5.2

Mechanical safety

•
Switch off the power supply!
–
–
–
•
Always assemble the cylinders with the corresponding cover.
•
Set all components up so that it's easy to activate the switches and interrupters.
•
Mount all of the components securely on the profile plate.
•
Follow the instructions about positioning the components.
•
Make sure that limit valves are not actuated from the front.
•
Risk of injury during troubleshooting!
Use a tool such as a screwdriver to actuate limit switches.
© Festo Didactic 8068243
Hydraulic power pack with load sensing variable displacement pump and constant displacement pump
Switch off working and control power before working on the circuit.
Only reach into the setup when it's at a complete standstill.
Be aware of potential overtravel times for the drives.
CAUTION
WARNING
CAUTION
11