Audio-Technica AT-WLA1 Manual Del Usuario página 14

Tabla de contenido

Publicidad

Specifications
Amplifier
Maximum output level
Supported headphone impedance
Playback frequency response
THD
Signal to noise ratio
Microphone
Type
Polar pattern
Sensitivity
Frequency response
Communication specifications
Communication system
RF output
Maximum communication range
Frequency band
Modulation method
Compatible Bluetooth profiles
Support codec
Supported content protection method
Transmission band
Other
Power supply
Charging time
Operating time
Weight
Operating temperature
Input jack
Output terminal
Included accessories
* The above figures depend on operating conditions.
For product improvement, the product is subject to modification without notice.
• The Bluetooth
®
word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Audio-Technica Corporation is
under license. All other trademarks are property of their respective owners.
• "AAC" logo is a trademark of Dolby Laboratories.
• Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries, used with permission.
aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries, used with
permission.
2.5 mW + 2.5 mW (at 16 ohms and THD10%)
11.5 to 47 ohms
20 to 20,000 Hz
0.15% or less
55 dB (characteristic A) or higher
Electret condenser
Omnidirectional
-44 dB (1 V/Pa, at 1 kHz)
100 to 10,000 Hz
Bluetooth version 4.1
0.7 mW EIRP
Line of sight - approx. 10 m (33')
2.402 GHz to 2.480 GHz
FHSS
A2DP, AVRCP, HFP, HSP
Qualcomm
®
SCMS-T
20 to 20,000 Hz
DC 3.7 V lithium polymer battery
Approx. 3 hours*
10
Continuous transmission time (music playback): Max. approx. 7 hours*
Continuous standby time: Max. approx. 200 hours*
***
g (0.63 oz)
5°C to 40°C (41° F to 104°F)
Micro USB Type B
A2DC connector
• USB charging cable (30 cm (1') USB Type A / Micro USB Type B)
• Ear hooks
• Clip
• Pouch
aptX™ audio, AAC, SBC
0.35
13

Publicidad

Tabla de contenido
loading

Tabla de contenido