Display Control; Keypad And Leds - Ingeteam Ingecon EMS Home Serie Manual De Instalacion Y Uso

Ingeteam

4. Display control

InGECOn EMS Home inverters/chargers incorporate a "Display + keypad" unit to
interface with the installer or the user.
This interface allows the display of the main internal parameters and the
configuration of the entire system during installation.
Parameters, variables and commands are organised as menus and submenus.

4.1. Keypad and LEDs

The keypad has four keys:
To exit a parameter, leave a menu and returning to the next level up in the structure, to not
confirm a change or not accept a suggestion.
With this key you can scroll up the list of parameters or folders within the same level or increase
the value of an editable parameter by one base unit.
Scroll down the list of parameters or folders within the same level or decrease the value of an
editable parameter by one base unit.
Serves to accept a parameter as valid, to enter a lower level menu in the structure, to confirm a
change or accept a suggestion.
The front panel has three LEDs:
Green LED
•
lit).
•
Orange LED
•
•
•
temperature.
•
Red LED
•
54 - English
Flashing for 1 second: inverter starting up (manual shutdown if the red LED is also
On: inverter generating isolated voltage or connected to the auxiliary grid.
Flashing for 0.5 seconds: the external fan is not running correctly.
Flashing for 1 second: the internal fan is not running correctly.
Flashing for 3 seconds: inverter limiting battery charge power due to high
On: presence of alarm.
On: manual shutdown.
display control
ABH2000IKE02_ - User manual