Battery Tool Use And Care; Service; Nailer Safety Warnings - Senco Fusion F-35XP Instrucciones De Empleo

EN
24. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working
conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a
hazardous situation.
25. Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not
allow for safe handling and control of the tool in unexpected situations.

BATTERY TOOL USE AND CARE

26. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create
a risk of fire when used with another battery pack.
27. Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
28. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other
small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may
cause burns or a fire.
29. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
30. Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable
behaviour resulting in fire, explosion or risk of injury.
31. Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the
instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of
fire.

SERVICE

32. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the
safety of the power tool is maintained.
33. Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized
service providers.

Nailer Safety Warnings

1. Always assume the tool contains fasteners. Careless handling of the nailer can result in unexpected firing of fasteners and
personal injury.
2. Do not point the tool towards yourself or anyone nearby. Unexpected triggering will discharge the fastener causing an injury.
3. Do not actuate the tool unless the tool is placed firmly against the workpiece. If the tool is not in contact with the workpiece, the
fastener may be deflected away from your target.
4. Disconnect the tool from the power source when the fastener jams in the tool. While removing a jammed fastener, the nailer
may be accidentally activated if it is plugged in.
5. Use caution while removing a jammed fastener. The mechanism may be under compression and the fastener may be forcefully
discharged while attempting to free a jammed condition.
6. Do not use this nailer for fastening electrical cables. It is not designed for electric cable installation and may damage the insula-
tion of electric cables thereby causing electric shock or fire hazards.
7. Wear ear protectors. Exposure to noise can cause hearing loss.
8. Hold the power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden
wiring. Fasteners contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an
electric shock.
9. Do not use the power tool in locations where the ambient temperature may reach 4°C (39.2°F) or exceed 40˚C (105˚F).
10. A battery short can cause a large current flow, overheating, possible burns and even a breakdown.
• Do not touch the terminals with any conductive material.
• Avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc.
• Do not expose battery cartridge to water or rain.
11. Consecutive charging may cause overheating. If you need to recharge batteries consecutively, wait about 15 minutes for the
charger to cool.
GENERAL POWER TOOL SAFETY WARNINGS
6