Shower Enclosure Installation - OVE GRANADA 60 Manual Del Usuario

SHOWER ENCLOSURE INSTALLATION

1-2. Using the plastic screws on the wall jamb (E), adjust the level of the shower frame. Also, make sure it fits
snuggly between the 2 walls.
Note: A total of 8 plastic screws on the wall jamb (E) will help you adjust the level of the shower frame
3. Mark the position of the holes of the wall jambs (E) on the wall.
4-5. Remove the shower frame and drill guide holes with a ø6mm (1/4in) drill bit.
6-7. Insert the wall anchors (AA) into the wall and put back the shower frame in place.
8. Install the tracks (E) on the wall using screws (BB).
5
ø6 mm
1/4 in
and make it snuggly fit between the 2 walls.
6
AA
15
1
3
7
2
4
8
BB