Switching Between Ntsc And Pal Configuration; Adjusting The Volume; Selecting The Disc - Alpine DHA-S680 Manual De Operación

Switching between NTSC and PAL
configuration
Switch the video output configuration to NTSC or
PAL according to the type of television and the
disc recording method.
1
Press the NTSC/PAL button for at least 5
seconds.
NOTES
• NTSC is the standard and there is no need to change
the setting. The system is set to NTSC at time of
shipment from the factory.
• The image output configuration must be correct.
Otherwise the following message appears and
playback does not start: "VIDEO SIGNAL SYSTEM
IS NOT CORRECT".
• Using the Number Keys
Tips
This describes use of the Number Keys,
particularly the "+10" key.
To input 10: Press the "+10" key once and
then press the "0" key.
To input 16: Press the "+10" key once and
then press the "6" key.
To input 23: Press the "+10" key twice and
then press the "3" key.
* Each time the "+10" key is pressed, the
number increases by 10.
• Reading this manual
Stopping playback
Tips
Press the stop button during playback to stop
playback. That position is stored in the memory.
1
Press the
• Using the PRE-STOP function (DVD,
Tips Video CD only)
When the PRE-STOP function is used,
the position at which playback is stopped
is stored in the memory, and playback
resumes from that position.
1
2
All manuals and user guides at all-guides.com
DVD
Video CD
CD
DVD
L
button during playback.
L
Press the button once during
playback.
"PRE-STOP" is displayed.
: : : : :
Press the button in the PRE-STOP
mode.
Playback starts from the position at
which it was stopped.

Adjusting the volume

Adjust the volume for connecting only with the
Digital Audio Processor (PXA-H510/PXA-H900).
1
Move the rotary encoder to the right or left.
Turn to the right to increase the volume.
Turn to the left to decrease the volume.
NOTE
If an Ai-NET product (head unit or AV head unit) has
been connected in addition to the Digital Audio
Processor (PXA-H510/PXA-H900 or AV head unit), or
if this equipment is connected singly to a TV monitor,
adjust the volume on the connected equipment.

Selecting the disc

1
Press the DISC DN or DISC UP button to select
the side you want to play.
The DHA-S680 detects the disc (DVD, Video CD,
CD) automatically and starts playback.
NOTE
For CDs, if repeat is OFF, there will be an automatic
changeover to the next disc after the disc finishes
playing.
For DVD and video CD, discs will not be switched even
if repeat is OFF.
For further information about repeat switching, see
"Chapter/track/title repeat playback" (on Page 16).
These indicate the discs for which
the function can be used.
Video CD
CD
DVD ...DVDs
...Video CDs
Video CD
...Music CDs
CD
This indicates supplementary
explanation of operation of this
system.
FR
ES
DE
IT
SE
11
-EN