Digital Audio Processor (Optional); Adjusting The Parametric Equalizer (Only When Connected With Pxa-H510) - Alpine DHA-S680 Manual De Operación

Digital Audio Processor (Optional)

ENT
When used with a digital audio processor (PXA-
H510/PXA-H900), operation is possible from the
remote control unit included with the DHA-S680.
Also refer to the PXA-H510/PXA-H900's
operating instructions.
Adjusting the parametric equalizer
(only when connected with PXA-
H510)
Adjust the parametric equalizer's band frequency,
band width and level.
1
During playback, press the A.PROC button.
The setting menu appears.
2
Use the Joystick to select "PARAMETRIC-EQ",
then press the ENT button.
32
-EN
All manuals and user guides at all-guides.com
A. PROC
BAND
3
Use the Joystick to select the band to be set,
then press the ENT button.
The band whose frequency is indicated in yellow
can be adjusted. The parametric equalizer's
setting screen consists of two pages. Press the
BAND button for at least 2 seconds to switch
between pages 1 and 2.
4
Use the Joystick to adjust the frequency, then
press the ENT button.
5
Use the Joystick to select the band width (Q-
FACT), then press the ENT button.
6
Use the Joystick to adjust the band width, then
press the ENT button.
7
Use the Joystick to select the level (LV), then
press the ENT button.
8
Use the Joystick to adjust the level, then press
the ENT button.
NOTE
Press the RTN button to return to the previous screen.
9
Press the A.PROC button to close the digital
audio processor screen and return to the
playback screen.
NOTE
When connected with PXA-H900, DHA-S680 cannot
make parametric equalizer adjustment.