Default Settings (SET UP)
Changing the language settings
The audio language, subtitle language and menu
language can be set according to your
preferences.
NOTE
When the settings are changed, the old settings are
overwritten. Make a note of the current settings before
making changes. The settings are not cleared even
when the vehicle's battery is disconnected.
1
In the stop mode, press the SET button for at
least 2 seconds.
The default setting menu appears.
NOTE
This operation cannot be performed in the PRE-STOP
mode.
2
Use the Joystick to select "LANGUAGES", then
press the ENT button.
3
Use the Joystick to make the selection, then
press the ENT button.
4
Use the Joystick to select the desired language,
then press the ENT button.
AUDIO
Set the audio language produced from the
speakers.
SUBTITLE
Set the language of the subtitles displayed on
the screen.
MENU LANGUAGE
Set the language used for the menus (title menu,
etc.).
All manuals and user guides at all-guides.com
5
The setup screen for the selected language
is displayed.
ORIGINAL
The disc is played with the audio language set
as the priority language for the disc. (AUDIO
only)
AUTO
The disc is played with the subtitle language set
as the priority language for the disc. (SUBTITLE/
MENU LANGUAGE only)
OTHERS
Set this to play the disc with a language other
than one of the languages displayed. Use the
keys "0" to "9" to input the 4-digit language
code, then press the ENT button. For the
language codes, refer to "List of language codes"
(page 59).
NOTES
• If the disc does not include the selected language, the
disc's default language is set.
• Languages set upon shipment from the factory:
Audio language : ORIGINAL
Subtitle language : AUTO
Menu language : AUTO
• Press the RTN button to return to the previous screen.
Press the SET button for at least 2 seconds.
The settings are stored and the set up mode is
canceled.
AUDIO
(audio languages)
SUBTITLE
(subtitle languages)
FR
MENU LANGUAGE
(menu languages)
ES
DE
IT
SE
21
-EN