Replacing The Staple Case In The Staple Unit; (Staple Finisher-U1/Booklet Finisher-U1); Replacing The Staple Case In The Staple Unit (Staple Finisher-U1/Booklet Finisher-U1) - Canon imageRUNNER ADVANCE C3330i Guía De Asistencia

Replacing the Staple Case in the Staple Unit

(Staple Finisher-U1/Booklet Finisher-U1)

When the stapler unit of the Staple Finisher-U1 or Booklet Finisher-U1 is almost out of staples and the staple
case in the stapler unit must be replaced, a screen prompting you to replace the staple case appears on the
touch panel display. Follow the procedure described below to replace the staple case.
IMPORTANT
Remove the orange seal that holds the staples together after you place the staple case into the staple cartridge.
NOTE
The Staple Finisher-U1 and Booklet Finisher-U1 are optional products.
)
We recommend that you order staple case from your local authorized Canon dealer before your stock runs out.
)
Use only staple cases intended for use with this machine.
)
01
Open the front cover of the finisher.
Booklet Finisher-U1
Staple Finisher-U1

Replacing the Staple Case in the Staple Unit (Staple Finisher-U1/Booklet Finisher-U1)

02
Pull out the staple cartridge.
1. Hold and pull up the green part to unlock the staple
cartridge.
2. Pull out the staple cartridge.
41