Publicidad
Idiomas disponibles
Idiomas disponibles
To unlock the remote and reset it back to Public mode so it can be used
E
to control any laser unit again, press and hold the RPM button on the
remote keypad.
Resetting a Remote from Private Mode
When a remote is in Private Mode with a laser unit, you may need to
reset the remote in order to use it with the laser unit again.
Scenario
When pressing and holding
on the laser keypad, the
15˚/45˚/90˚
laser entered No Remote
mode.
The laser unit entered
Private mode while paired
with another remote.
If the Lock LED is lit on
the remote, the remote has
been paired with another
rotary laser.
Controlling the Laser from up to 100' Away
You can use Bluetooth
capability to pair the laser with the DEWALT
®
Tool Connect™ application on your cell phone, and then use your cell
phone to control the laser (Figure
From either
1.
Tool Connect™ application to your cell phone and then open the
application.
On the laser's keypad, press
2.
Pair the DEWALT
Tool Connect™ application to the laser via a
3.
®
Bluetooth
connection.
®
22
How to Recover
On the laser keypad, press and hold
the RPM button to return the laser to
Public mode so it can be controlled by
any remote.
Reset the laser unit back to Public
mode. On the laser keypad, either:
for 3 sec to turn the
• Press
power off and then press
to turn the power back on, OR
• Press and hold the RPM button.
Press and hold the RPM button on the
remote to reset it to Public mode.
).
J 2
or
, download the DEWALT
to turn the laser on.
First Time Pairing
1. On the D
WALT
E
Connect™ application, click
2. In the list of D
E
types, select Rotary Laser.
3. Enter a Name for the rotary
laser (e.g., DW080LRS/LGS).
4. On the laser keypad, press
and hold
for 3-5 sec until the
Bluetooth
connection turns on
®
(blue LED starts blinking).
5. When the application lists
the laser's model number as IN
RANGE, select it.
again
NOTE:
If the Bluetooth
connection does not turn on, replace the 20V
®
battery.
On the D
WALT
4.
®
E
LGS rotary laser.
The D
WALT
Tool Connect™ application will display information
®
5.
E
about the laser on the Diagnostics screen:
• If the current settings are one of the "favorite settings" you have
saved for the laser, it will display the name of that setting (e.g.,
®
Main St - Site 1).
• If the laser is dropped, disturbed, etc., it will send messages to
the Tool Connect™ application to inform you.
®
• If the Tracking feature is on, the application will know where the
laser is and will let you know if the laser has been taken and is
now out-of-range. (The Coin Cell battery enables the Tracking
feature.)
Select ACTIONS.
6.
• If you are using more than one rotary laser and need to check
which laser is paired with the application, press the Identify
button at the bottom of the screen. On the paired laser, the
blue LED next to
• If you need to, you can enable, disable, or unpair the laser.
Paired Before
Tool
On the laser keypad,
®
.
press
Bluetooth
®
WALT product
Tool Connect™ application, select the DW080LRS/
will blink.
to turn on the
connection.
Publicidad
