Displaying And Deleting Measurements; Care And Maintenance; Disposal - Beurer BM 50 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

It is important to consult your doctor regularly for advice. Your doctor will tell you your individual values for
normal blood pressure as well as the value above which your blood pressure is classified as dangerous.
The classification on the display and the scale on the unit show which category the recorded blood
pressure values fall into. If the systolic and diastolic values fall into two different categories, the risk
indicator on the device always shows the higher category.

8. Displaying and Deleting Measurements

User Memory:
Every successful measurement is stored along with its date and time. If there are more than 100
measurements in a particular user memory bank, the oldest measurement is deleted.
Press the Start/Stop Button to power on the device. Press the +/- Buttons to select a user memory.
Average Values:
• Press the Memory Button; A appears on the display along with the average of all saved measurements
in the selected user memory.
• Press the Memory Button again. AM appears on the display along with the average value of the morning
measurements for the last seven days (morning: 5:00 AM – 9:00 AM).
• Press the Memory Button a third time. PM appears on the display along with the average value of the
evening measurements for the last seven days (evening: 6:00 PM – 8:00 PM).
Individual Measured Values:
• Press the Memory Button repeatedly to display the last individual
measurements.
• To shut the device off, press the Start/Stop Button.
• You can exit the menu at any time by pressing the Start/Stop Button.
Clearing Memory:
• To clear one of the user memories, you must first select it.
• Start individual measurement access as described above and select a user memory.
• Press and hold both the + and – Buttons for five seconds. All values in the selected user memory
will be deleted. If audio output is on, the device will announce "All the counts in the memory have
been erased."

9. Care and Maintenance

• Clean the device and cuff with a slightly moistened cloth.
• Do not use detergents or solvents.
• Never immerse the device in water or other liquids.
• When storing the device, make sure no heavy objects are placed on top of it. Remove the batteries.
Ensure the Air Tube does not have any sharp kinks.

10. Disposal

Observe the local regulations for material disposal. Dispose of the device in accordance with local
regulations. If you have an questions, please contact the local authorities responsible for waste disposal.
12

Publicidad

Tabla de contenido
loading

Tabla de contenido