XC40 (2018-)
– Recommended position.
– The distance between the bars should
be 70-80 cm.
Load carrier integrated rails
V60 (2018-)
– Recommended position.
– The distance between the bars should
be 70-80 cm.
Installing load carriers
– Carefully install the load carriers on the
roof trim strip (integrated rail). Transfer
the mounting (1) so that it is against the
roof trim strip on both sides of the car.
– Insert the mounting plate (2) towards
the roof trim strip.
– Move the knob outwards to facilitate
turning.
– Screw in the screw without tightening
it fully.
– Check that the rubber shim is correctly
positioned and that the load carriers
are straight.
– Tighten the screw with the integrated
torque wrench until it clicks.
en-GB
11