Motion CM-34 Manual De Instrucciones página 11

Pair a remote
2
For the following steps the power grid shoud be turned on. It is recommended to
first program the end limits of your wired motor before programming the smart
switch. Please see the manual of your motor how to program the end limits.
(Max. 10 remotes can be paired to the switch.)
Shortly press the program button on the smart switch. The blind will start
2.1
stepping and the LED on the smart switch will start blinking, indicating that
program mode has been activated.(The blind remains stepping until the program
mode is de-activated.)
Press the pair button on the back of the remote control to pair the blind to the
2.2
selected channel.The blind will shortly stop stepping indicating that the remote
has been paired to the blind.
Pair
button
Repeat steps 2.1 - 2.2 to remove a blind from a channel.
11