Motion CM-34 Manual De Instrucciones página 14

Activate Smart operation
5
14
If the program mode is de-activated; Shortly press the program button
5.1
on the smart switch. The blind will start stepping and the LED on the
smart switch will start blinking, indicating that program mode has
been activated.
Press the center and up button to Activate Smart operation. The blind
5.2
go's to the up position, to the bottom position and back tot the up
position. The smart switch exits programming mode.
WARNING: do not stop this procecure
For the following steps the power grid shoud be turned on.
Up
Center