Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Steps
Carefully pull factory bumper away from frame to expose
the fog light connections and wiring. Unplug fog lamps and
remove wiring from bumper as necessary,
then remove bumper from the vehicle.
3
Install factory fog lamps (if equipped) in new bumper using
provided 4mm hardware. If using aftermarket lights, use hardware
provided with light.
5
Mount bumper using provided 12mm hardware. Install requires
(3) Nuts, (1) Bolt, (4) Flat Washers and (4) Lock Washers per side.
Temporarily leave hand tight.
7
Care and Cleaning
• Rampage Bumpers are built to last; any detergent you use to wash your vehicle is sufficient to clean the bumper. Do not use any
harsh abrasive detergents.
Congratulations!
You have purchased one of the many quality Rampage branded products offered by Lund International, Inc. We take the utmost pride in
our products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product
is top quality in terms of fit, durability, finish and ease of installation.
ETQ IS-RR-105
800-241-7219 • Visit us at Rampageproducts.com
Rampage Products is a trademark of Lund International, Inc
Page 2 of 6
Remove the fog lamps from factory bumper using a Phillips
head screwdriver, save lamps.
4
Place front bumper unto the frame, lining up built-in
studs with factory frame holes.
Caution:
2 person lift
6
Center bumper left and right and level. Tighten hardware.
8
Publicidad
