Hazard Warnings - HOLZMANN MASCHINEN KAP305JL Manual De Usuario

 Never open the laser module. Unexpected exposure to the beam may occur.
 Do not replace the laser with another type of laser.
 Repairs to the laser may only be carried out by the laser manufacturer or an authorized
representative.

13.7 Hazard Warnings

Despite their intended use, certain residual risks remain. Due to the structure and construction of
the machine, hazardous situations may occur when handling the machines:
- Touching the saw blade in the uncovered sawing area.
- Injuries caused by touching the running saw blade
- Kickback of workpieces and workpiece parts due to insufficient fastening
- Saw blade breakage or throwing out parts of the saw blade
- Hearing loss / damage to health due to wood dust if protective equipment and dust collection
systems are not used in closed rooms
Or others that are marked as follows in this manual:
A safety instruction designed in this way indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
Such a safety instruction indicates a potentially hazardous situation which, if not
avoided, may result in serious injury or even death..
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
A safety notice designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Irrespective of all safety regulations, their sound common sense and corresponding technical
suitability/training are and remain the most important safety factor in the error-free operation of
the machine. Safe working depends first and foremost on you!
TRANSPORT
For proper transport, follow the instructions and information on the transport packaging regarding
centre of gravity, attachment points, weight, means of transport to be used and prescribed
transport position, etc.
Transport the machine in its packaging to the place of installation. When lifting, carrying and
depositing the load, make sure that you are in the correct posture:
 Lifting, Depositing
Ensure stability when lifting / setting down (legs hip width).
Lift / lower load with bent knees and straight back (like weightlifter).
Do not lift / lower the load jerkily.
HOLZMANN MASCHINEN GmbH
D A N G E R
W A R N I N G
C A U T I O N
N O T I C E
www.holzmann-maschinen.at
TRANSPORT
37
KAP305JL