1. If equipped with center speaker:
Unclip and remove the grille then
remove (4) Phillips screws to
remove the speaker. (Figure A)
2. Unclip and remove the panel
below the radio including the A/C
controls. (Figure B)
Dash Disassembly
(Figure A)
(Figure B)
99-7616
3. Unclip the radio trim including the
A/C vents then unplug the hazard
switch and remove the panel.
(Figure C)
4. Remove (4) Phillips screws
securing the radio. (Figure D)
Continue to kit assembly
2
(Figure C)
(Figure D)