ReliOn CONFIRM Manual De Instrucciones De Usuario página 32

If it takes longer than 20 seconds to obtain a blood sample
and to touch the test strip to the blood drop, repeat Step 3.
Step 4: The meter will count down, showing a flashing dash.
After 7 seconds, a beep sounds and the test result and date/
time are shown.
Results will be shown in units of mg/dL.
Record result in your logbook.
Step 5: When the test is done, pull the test strip
out, and dispose of it. The meter automatically
shuts off when you remove the test strip.
Remove the lancet from the lancing device.
Dispose of the used lancet according to
local guidelines.
32