INVENTOR CLCO290-09 Manual De Usuario página 14

Note: Once the Exhaust Hose assembly and
Adjustable Window Slider are prepared,
choose from one of the following installation
methods. Type 1: Hung Window or Sliding
Window Installation(optional)
Foam seal B
(Adhesive type-shorter)
Foam seal A
(Adhesive type)
1. Cut the foam seal (adhesive type) to
the proper length and attach it to the
window frame.
Window slider A Window slider B
(if required)
2. Attach the window slider kit to the
window opening.
Foam seal C
(Non-adhesive type)
3. Cut the non-adhesive foam seal C strip to
match the width of the window. Insert the
seal between the glass and the window
frame to prevent air and insects from getting
into the room
Security Bracket
2 Screws
4. If desired, install the security bracket with
2 screws as shown.
5. Insert the window slider adaptor into
the hole of the window slider
EN
Foam seal B
(Adhesive type-shorter)
or Foam seal A
(Adhesive type)
Window slider B
(if required)
or
Window slider A
Foam seal C
(Non-adhesive type)
or
Security
or
Bracket
2 Screws
or