INVENTOR CLCO290-09 Manual De Usuario página 17

Exhaust hose installation
The exhaust hose and its adaptor should be
installed or removed according to the usage
mode. Under COOL mode the exhaust hose
must be installed, under FAN or DRY the
exhaust hose should be removed
Operation Instructions
COOL operation
-Press the "MODE" button until the
"COOL" indicator light comes on.
-Press the ADJUST buttons "+" or "-" to
select your desired room temperature.
The temperature can be set within a
range of 17°C~30°C/62°F~88°F(or 86°F).
-Press the "FAN SPEED" button on the
remote cotroller to choose the fan speed.
EN
DRY operation
-Press the "MODE" button until the
"DRY" indicator light is active.
-Under DRY mode, the fan speed or
adjusting the temperature is not possible.
The fan operates under low speed.
-For optimal dehumidifying please keep
all windows and exits shut.
-Do not put the duct to window.
FAN operation
-Press the "MODE" button until the"FAN
" indicator light comes on.
-Press the "FAN SPEED" button on the
remote cotrollerto choose the fan speed.
The temperature can not be adjusted. -Do
not put the duct to window.
15