Assembling The Product; Cleaning, Disinfection, Sterilization; Safety Instructions; Reprocessing Limitation - Erbe 20191-237 Manual Del Usuario

OBJ_DOKU-193155-004.fm Seite 19 Donnerstag, 20. Februar 2020 2:05 14
4.3

Assembling the product

Insert the shaft extension into the handle as far as it goes.
5

Cleaning, disinfection, sterilization

5.1

Safety instructions

May be cleaned in an ultrasonic bath.
Never use sharp objects for cleaning.
Disinfectants must be rinsed off thoroughly after use.
Maximum air pressure during drying: 2 bar.
Maximum water pressure during rinsing: 2 bar.
During machine cleaning and disinfection, do not exceed 95 °C.
Observe the specifications from the manufacturer of the deter-
gent and disinfectant and in the chapter "Overview of validated
procedures".
During sterilization, do not exceed 138 °C.
Do not sterilize in hot air.
5.2

Reprocessing limitation

Frequent reprocessing can damage this product. Observe the
safety instructions for checking the product. With visible damage
or functional impairment, the product may no longer be used.
5.3

Dismantling

1. Remove the shaft extension from the handle.
19