Yakima Locking Skewer Guia De Inicio Rapido página 2

Remove shaft from handle.
Open handle.
Hold the adjustment knob.
Turn handle clockwise to
remove the shaft.
NOTE: Shaft will turn with adjustment knob.
To carry bicycle...
Insert bike forks
onto skewer.
READ IMPORTANT WARNINGS AT
END OF THIS INSTRUCTION!
1033571D - 2/4
NOTE: Adjustment knob will turn with shaft.
With lever open, tighten
adjustment knob clockwise
until the lever closes with
FIRM resistance.
NOTE: Shaft will turn with adjustment knob.
• SKS ® Lock Cores are optional.
• To install SKS ® Lock Cores,
refer to lock instructions.
• To purchase lock cores visit
www.yakima.com or your local
Yakima dealer.
Install Locking Skewer.
Insert skewer.
Insert the shaft into
your fork block by
twisting while pushing.
Hold the shaft at the far
end. Join the handle with
the shaft, turn the shaft
counter-clockwise.
Close lever.
Your bike's forks are secure
ONLY after the lever closes
with SOLID RESISTANCE.
WARNING:
Bicycle forks must be grabbed
securely before driving away!