Maintenance Schedule - Briggs & Stratton 7800950-00 Manual Del Operador

Maintenance
WARNING
DO NOT attempt any adjustments, maintenance, service
or repairs with the engine running.
• STOP engine.
• STOP blade.
• Engage parking brake.
• Remove key.
• Remove spark plug wire from spark plug and secure
away from plug.
• Engine and components are HOT. Avoid serious burns,
allow all parts to cool before working on machine.

Maintenance Schedule

RIDER
Every 8 Hours or Daily
• Check safety interlock system
• Clean debris off rider
• Clean debris from engine area
Every 25 Hours or Annually *
• Check tire pressure
• Check mower blade stopping time
• Check rider for loose hardware
Every 50 Hours or Annually *
• Clean battery and cables
• Check brakes
See Dealer Annually to
• Lubricate rider
• Check mower drive belts
• Check mower blades **
* Whichever comes first
** Check blades more often in regions with sandy soils or
high dust conditions.
Rider Maintenance (Basic)
How To Check The Safety Interlock System
Refer to "Safety Interlock System Checks" in the Operation
section.
How To Clean The Rider And Mower Deck
WARNING
Wear heavy leather gloves when handling or working
around cutting blades. Blades are extremely sharp and
can cause severe injury.
1. Raise the mower deck to the highest cutting position.
Refer to "How To Adjust The Cutting Height".
2. Clean the underside of the mower deck, removing all
accumulation of grass clippings and debris.
3. Clean the top of the deck, removing all grass clippings
and debris.
4. Use a brush or compressed air to remove loose debris
from the rider.
How To Clean The Engine
Use a brush or compressed air to remove loose debris on
or around the engine.
How To Check Tire Pressure
Use a tire gauge to check the tire pressure; add or release
air as needed. Refer to "Product Specifications" for correct
pressure.
en
19