Light Kit Assembly - Craftmade ELLINGTON ART52OB5 Manual Del Usuario

9. Light Kit Assembly.

Remove 1 screw from fitter plate on underside of
motor housing and partially loosen the other 2
screws.
Align slotted holes in center of light kit fitter with
loosened screws in fitter plate, allowing molex
connections from motor housing to come through
hole in middle of light kit fitter. Twist light kit fitter
to lock. Re-insert screw that was previously
removed and secure all screws with a Phillips
screwdriver.
Connect the WHITE wire from the light kit fitter to
the WHITE wire from motor housing. Connect the
BLACK wire from the light kit fitter to the BLACK
wire from the motor housing. Make sure the molex
connections snap together securely.
Partially loosen the 3 screws on underside of light
kit fitter. Carefully arrange wiring in opening in
center of light kit fitter. Align slotted holes in
threaded rod assembly with loosened screws in
light kit fitter. IMPORTANT: Be careful when
attaching threaded rod assembly that the wiring
does not get pinched or caught under the metal
edges. Allow wires to come through corresponding
openings in plate on threaded rod assembly. Twist
threaded rod assembly to lock. Secure all 3 screws
with a Phillips screwdriver.
If necessary, carefully push any excess wiring
under small hooks in threaded rod assembly,
taking care not to puncture wires or the protective
sleeves on molex connections.
Install 3 candelabra base 40 watt max. bulbs
(included).
Important: When replacing bulb, please allow bulb
and shade to cool down before touching them.
Remove finial and threaded washer from threaded
rod assembly. Align threaded rod with hole in
middle of shade and push up gently, allowing
threaded rod to come through hole. Replace
threaded washer on threaded rod. Align threaded
rod with hole in middle of shade cover and push
up gently, allowing threaded rod to come through
hole. Secure shade and shade cover to light kit
fitter with finial. Note: Do NOT overtighten finial as
shade may crack or break.
All manuals and user guides at all-guides.com
threaded rod
assembly
page 8
motor housing
fitter plate
threaded washer
finial
light kit fitter
molex
connections
bulb
wiring
hook
shade
shade cover