StartUsingYourCookerHood - Cata AG6-A600 GBK Instrucciones Para La Instalación, El Uso, El Mantenimiento

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

The angle of the bend of the ventilation pipe should not be less than 120º; you
must direct the pipe horizontally, or, alternatively, the pipe should go up from the
initial point and should be led to an outer wall.
After the installation ,make sure that the cooker hood is level to avoid grease
collection at on end.
Ensure the exhaust ducting selected for installation complies with relevant
standards and is fire retardant.
WARNING:
Start Using Your Cooker Hood
Touch control
Timer
1. Press the "Power" button, the button control the "on" & "off " of the hood.
2. Press the button "Speed" time after time, the motor runs as low / mid / high / low /
mid..., the speed runs circularly; and the LED display will indicate as 1-2-3-1-2...
circularly.
3. Press "Lamp" button, the light is on, press this button again, the light is off.Please
note the Lamp is not under control of the on/off button.
4. When the hood is working, if press the "Timer" button, the hood will go into the
status of acquiescent working (acquiescent time is 9mins), and then, LED display
will be shown 9.8.7.6 ...decreasing by 1,when time is up, the hood will be off
automatically and the lamp will extinguish. If pressing "Timer" button, the hood will
go in or go out "Timer" function.
 For safety reason, please use only the same
size of fixing or mounting screws which are
recommended in this instruction manual.
 Failure to install the screws or fixing device in
accordance with these instructions may result in
electrical hazards.
Lamp
21
Speed
Power
 

Publicidad

Tabla de contenido
loading

Tabla de contenido