Metra 99-9309 Manual Del Usuario página 10

DDIN / STACKED ISO DIN
HEAD UNIT PROVISION
1
Secure Double DIN brackets to the
inside edge of the kit with (4) 3/8"
Phillips screws provided. (Fig. A)
2
Slide the Double DIN head unit or
stacked ISO head units into the
bracket/radio housing assembly and
secure the Double DIN head unit
or stacked ISO head units to the
assembly using the screws supplied
with the radio. (Fig. B)
3 Locate the factory wiring harness
and antenna plug in the dash. Metra
recommends using the proper mating
adapters from Metra and/or AXXESS.
4
Reassemble dash in reverse order of
disassembly using the 99-9309 radio
trim panel instead of the factory center
stack panel.
99-9309 KIT ASSEMBLY
8
A
B