Iso Din Head Unit Provision - Metra 99-9309 Manual Del Usuario

ISO DIN HEAD UNIT PROVISION

1
Attach left and right radio housing
brackets to pocket with four #8 3/8"
Phillips screws provided. (Fig. A)
2
Secure radio housing brackets and
pocket to kit with four #8 3/8" Phillips
screws provided. (Fig. B)
3 Align the holes in the radio housing
brackets with the holes in the ISO DIN
and secure the brackets to the head
unit with the screws included with the
unit. (Fig. C)
4
Locate the factory wiring harness
and antenna plug in the dash. Metra
recommends using the proper mating
adapters from Metra and/or AXXESS.
5
Reassemble dash in reverse order of
disassembly using the 99-9309 radio
trim panel instead of the factory center
stack panel.
99-9309 KIT ASSEMBLY
7
A
B
C