Stryker L9000 LED Manual Del Usuario página 15

1. Lock open the cable clamp by turning the jaw handle clockwise until it
stops (see Figure 3).
Figure 3 Locking open the cable clamp
W K
ARNING
INADVERTENTLY DEPLOY AND CAUSE INJURY
W D
ARNING
INTENSITY LIGHT MAY CAUSE DAMAGE TO THE EYES
2. Insert a clean, dry fiberoptic cable into the cable port until the jaw latch
releases and the jaw clamps the cable in place (see Figure 4). Pull gently
on the fiberoptic cable to test that it is securely seated in the cable port.
Figure 4 Inserting the light cable into the cable port
3. Connect an endoscope to the opposite end of the fiberoptic cable.
4. To remove the light cable, press the mode button on the touch screen to
put the unit into standby. Then, turn the jaw handle clockwise until the
latch opens.
EEP FINGERS AWAY FROM THE CABLE CLAMP AS THE CLAMP MAY
O NOT LOOK DIRECTLY INTO THE CABLE PORT
.
. T -
HE HIGH
.
11