Cleaning And Care; Cleaning After Each Use; Thorough Cleaning - Cilio AIDA Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 33

Cleaning and care

Attention: Never immerse the base plate and the coffee maker in water or other liquids and do not clean these
parts in the dishwasher!

Cleaning after each use

· Always pull out the power cord and allow the coffee maker to cool down completely before each cleaning.
· Unscrew the coffee maker and remove the funnel. Carefully remove the espresso powder from the funnel.
Clean the sieve, the gasket and the funnel with clear water. Resistant powder residues in the funnel and sieve
can be removed with a cleaning brush.
· To clean the riser pipe, remove the gasket and sieve and rinse the upper part from the bottom with clear water.
· Rinse the interior of the upper and the lower part only with clear water. Wipe the outside as well as the base
plate with a soft cloth, slightly moistened if needed.
· Do not use any sharp objects or spirit, solvent, scrubbing brushes or abrasive cleaning agents for cleaning.
· Make sure that the appliance is completely dry before using it again or storing it. We recommend that you
keep the individual parts unscrewed during storage.

Thorough cleaning

Attention! To ensure the safe function of the coffee maker, the coffee maker must be thoroughly cleaned on a
regular basis. The intervals depend on the intensity of use. Check the coffee maker for heavy soiling before
each use.
1. Always pull out the power cord and allow the coffee maker to cool down completely before each cleaning.
2. Unscrew the coffee maker and remove the funnel. Carefully remove the espresso powder from the funnel.
Rinse the upper part, the sieve, the gasket and the funnel individually and thoroughly in hot rinse water. Also,
remove the gasket and sieve so you can clean the inside of the riser pipe in the top of the coffee maker.
3. Brush the funnel and sieve with a brush to remove any resistant powder residues from the holes.
4. Afterwards, rinse the upper part, the sieve, the gasket and the funnel thoroughly with clear water.
5. Rinse the interior of the lower part only with clear water. Wipe the outside as well as the base plate with a soft
cloth, slightly moistened if needed.
6. Make sure that the appliance is completely dry before using it again or storing it. We recommend that you
keep the individual parts unscrewed during storage.
13

Publicidad

Tabla de contenido
loading

Tabla de contenido