S/¾
Lllilby
°
= ....
]]i161;!
(on soss_ modes)
Depending on your model, you may have a one, two or three
piece bin. Eggs may be stored in the egg tray or loose in the bin.
NOTE= Store eggs in a covered container for long-term storage.
If your model does not have an egg storage bin, store eggs in
their original container on an interior shelf.
FREEZERFEATURES
Your model
may have
some or all of these features.
important information to know about glass shelves
and
covers:
Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature
changes or impact, such as bumping.
Tempered
glass is designed to shatter into many small,
pebble-size
pieces. This is normal. Glass shelves and covers
are heavy. Use both hands when removing them to avoid
dropping.
(e_ s®me me@As}
To remove and replace the freezer shelf=
1.
Remove
items from
the shelf.
2.
Lift back of shelf over
stop and slide shelf straight
out.
3.
Replace
the shelf by sliding
the back of the shelf into the
tracks
on walls of cabinet.
4.
Be sure to slide the shelf in all the way.
II
Frozen Food Storage Guide
Storage times will vary according
to the quality and type of
food, the type of packaging
or wrap used (should be airtight
and moisture-proof),
and the storage temperature.
Seal the
package
or container securely to avoid taste and odor transfer
throughout the product. Ice crystals inside a sealed package are
normal. This simply means that moisture in the food and air
inside the package
have condensed, creating
ice crystals.
Put no more unfrozen food into the freezer than will freeze
within 24 hours (no more than 2 to 3 Ibs of food per cubic foot
[907 to 1,350 g per L] of freezer space). Leave enough space in
the freezer for air to circulate around packages. The freezer
door must close tightly.
NOTE: For more information
on preparing
food for freezing,
check a freezer guide or reliable cookbook.
DOOR FEATURES
Your model may have some or all of these features.
Doo
or
vets
The door rails or trivets may be removed for easier cleaning.
Snap on Door Rails or Trivets (on some models)
To remove
and replace
the rails or trivets=
1.
Depending
on your
model,
remove
the rails or trivets
by
pushing
in slightly
on the front
of the bracket
while
pulling
out on the inside
tab. Repeat
these steps for the other
end.
2.
Replace
the rails or trivets
by aligning
the ends of the
brackets
with
the buttons
on the sides of the door
liner.
Firmly
snap bracket
and assembly
onto the tabs above
the
shelf as shown.
Style 1 - Door Rails
Style 2 - Trivets
16