Publicidad
Idiomas disponibles
Idiomas disponibles
Drop-in DoorRails (onsome models)
To remove and replace the rails:
1. Remove the rails by pulling straight up on each end of the
rail.
2. Replace the rails by sliding the shelf rail into the slots on the
door and pushing the rail straight down until it stops.
(R;m Rc cks
{}oo Bi 'ss
NOTE= Can racks may be purchased as an Accessory for some
models.
To remove and replace the racks/bins:
1. Remove the rack/bin
by lifting it and pulling it straight out.
2. Replace the rack/bin
by sliding it in above the desired
support and pushing it down until it stops.
REFRIGERATOR CARE
Explosion Hazard
Use nonflammable
cleaner.
Failure to do so can result in death, explosion, or fire.
Both the refrigerator
and freezer sections defrost automatically.
However, clean both sections about once a month to keep odors
from building up. Wipe up spills immediately.
IMPORTANT= Because air circulates between both sections, any
odors formed in one section will transfer to the other. You must
thoroughly
clean both sections to eliminate odors. To avoid odor
transfer and drying out of food, wrap or cover foods tightly.
To Clean Your Refrigerator:
NOTE= Do not use abrasive or harsh cleaners such as window
sprays, scouring cleansers, flammable
fluids, cleaning waxes,
concentrated
detergents,
bleaches or cleansers containing
petroleum
products on plastic parts, interior and door liners or
gaskets. Do not use paper towels, scouring pads, or other harsh
cleaning materials.
1. Unplug refrigerator
or disconnect power.
2. Hand wash, rinse, and dry removable
parts and interior
surfaces thoroughly.
Use a clean sponge or soft cloth and a
mild detergent
in warm water.
3. Wash stainless steel and painted metal exteriors with a
clean sponge or soft cloth and a mild detergent in warm
water. Dry thoroughly
with a soft cloth.
NOTE= To keep your stainless steel refrigerator
looking like
new and to remove minor scuffs or marks, it is suggested
that you use the manufacturer's
approved
Stainless Steel
Cleaner and Polish. To order the cleaner, see the
"Accessories"
section.
IMPORTANT= This cleaner is for stainless steel parts only!
Do not allow the Stainless Steel Cleaner and Polish to come
into contact with any plastic parts such as the trim pieces,
dispenser covers or door gaskets. If unintentional
contact
does occur, clean plastic part with a sponge and mild
detergent in warm water. Dry thoroughly
with a soft cloth.
4.
Plug in refrigerator
or reconnect
power.
NOTE= Not all bulbs will fit your refrigerator.
Be sure to replace
the bulb with an appliance
bulb of the same size, shape, and
wattage.
1. Unplug refrigerator
or disconnect power.
2. Remove the upper shelf to access the light shield.
3. Press the side of the light shield to release it from the catch
and pull the shield away from the light assembly.
4.
Remove the light bulb and replace it with a new 25-watt
appliance
bulb. Replace the light shield.
5.
Plug in refrigerator
or reconnect power.
17
Publicidad
