Setting The Date; Setting The Time - Bremont WATERMAN Manual Del Usuario

fully with 30-40 revolutions of the crown. By doing this you will achieve
maximum accuracy and have a power reserve of 42-hours, even when the
watch is not on your wrist.

SETTING THE DATE

You can adjust the date by unscrewing the crown and pulling it out to
position II. You will now be able to change the date by rotating the crown
anti-clockwise.
Do not change the date between 20:00 and 03:00

SETTING THE TIME

Pull the crown out to position III, this will stop the movement, you can
now position the minute hand exactly. To start the second hand, push the
crown back to position I. When setting the time, it is worth noting that
the date change always takes place at mid-night (00:00). If this change has
already taken place at 12:00 noon, you must move the hands forward by
12 hours. Ensure that the crown is screwed back in after setting the watch.
This can be achieved by gently pressing the crown down whilst rotating it
in a clockwise direction.
USING THE 24 HOUR HAND
The 24 hour hand allows the wearer to tell the time in an additional time