Setting The Date; Setting The Time - Bremont AC35 Manual Del Usuario

By doing this you will achieve maximum accuracy and have a power
reserve of 50+ hours, even when the watch is not on your wrist.

sETTiNG ThE dATE

You can adjust the date by pulling out the crown to position II. You will
now be able to change the date by rotating the crown clockwise.

sETTiNG ThE TiME

Pull the crown out to position III, you can now position the minute hand
exactly. When setting the time, it is worth noting that the date change
always takes place at midnight (00:00). If this change has already taken
place at 12:00 noon, you must move the hands forward by 12 hours.
Ensure that the crown is screwed back in after setting the watch. This
can be achieved by gently pressing the crown down whilst rotating it
in a clockwise direction.
wATCh CARE
Bremont watches are put through extensive testing before they are
released from the workshop - whether it is for time-keeping precision,
temperature, shock and scratch resistance or pressure testing; all of our
strict tolerances have to be met. Although Bremont watches have more
than proved their resilience before they are released from our workshop,
we want to ensure that the enjoyment that comes from wearing a Bremont
timepiece lasts generations. We therefore recommend that the following
tips for watch care are observed...
CLEANINg
Use warm water followed by a microfibre cloth to clean metal and sapphire.
CROwN
Ensure that the crown is pushed in to prevent entry of water into
the mechanism.
SEA wATER
Wash with fresh water following exposure to saline water.
SHOCkS AND JOLTS
Avoid any heavy shocks to the watch.
mAgNETIC FIELDS
Avoid contact with electrical equipment and strong magnets such as
speakers, magnetic tablet case covers and radio alarm clocks.