Festo SPC200 Manual De Instrucciones página 13

All manuals and user guides at all-guides.com
1 Notes on
The control panel type SPC200−MMI−1F has been designed
for commissioning, programming, diagnosing and operat
ing the SPC200 Smart Positioning Controller with operat
ing system from version 3.72. The control panel is in
tended for mounting on the front plate.
Detailed information on operating the SPC200 with the
control panel can be found in the user manual
P.BE−SPC200−... .
Caution
Pay strict attention to the following instructions in the
manual:
The safety guidelines
The designated use of the individual components
and modules.
Warning
Actuators can be unintentionally activated and both the
SPC200 and the control panel can be damaged if con
tacts are connected or disconnected when the power
supply is switched on.
Before undertaking installation and/or maintenance
work, switch off the following sources of power in the
sequence specified:
1. The compressed air supply
2. The power supply
Festo SPC200−MMI−1F 0503a English
useEnglish
11