Data Logging; Viewing Data Logged Readings; Hydrophobic Filter(S); Construction - GMI PS500 Manual Del Usuario

USER HANDBOOK

1.3 DATA LOGGING

Data logging allows gas values, summary logs and calibration
details to be logged at regular intervals and later downloaded.

1.3.1 Viewing Data Logged Readings

Data logged readings can be downloaded from the instrument,
to a PC, using GMI software and communication adaptor.
Contact our Sales Department at GMI for further details.

1.4 HYDROPHOBIC FILTER(S)

Filter(s), if fitted, should be checked regularly and replaced if
contaminated.
See "4.2 FILTER REPLACEMENT" on page
4-1.

1.5 CONSTRUCTION

The instrument is housed in a tough, impact resistant moulded
case. The instrument is sealed to IP65 and the sensing
elements, sample inlet and charging socket sealed to IP54.
The instrument withstands physical impact testing to EN
61779.

1.6 IDENTIFICATION LABEL

The label on the rear of the instrument contains the serial
number and certification details (this serial number also
appears on the instrument display after switch on, during
warm-up).
1-4