Select Calibration Gas - GMI PS500 Manual Del Usuario

2.2.4 Select Calibration Gas

This configurable option is available to allow the user to select
a different flammable gas from that which was originally used
to calibrate the instrument.
When this option is displayed, as shown in Fig. 2.6, the gas
that was originally used to calibrate the instrument is identified
between two arrowheads.
Note: The instrument calibration certificate also identifies
the original calibration gas type.
To select a different gas type, press the
through the available options.
When the required option is highlighted, press the
to select.
Accuracy for the re-selected gas type is + 20%.
Note:
Fig. 2.6 Cal Gas Selection
OPERATION
button to scroll
button
2-5