GMI PS500 Manual Del Usuario página 48

Fig. 4.2 Filter and Cover Removed
2. Fit a new Sensor Grille Filter (Part No. 66083), if required.
Note: The filter is keyed and can only be fitted in one
location.
3. R e p l a c e t h e s e n s o r c o v e r a s s e m b l y b y f i r s t
positioning the location feet, then pressing the cover
down on to the filter.
4. Replace and secure, the cover screw.
Note: Do not over-tighten the screw.
OPERATOR MAINTENANCE
HEX KEY
FILTER
COVER
4-3