Refill Detergent; Water Connection - Kärcher HDS 3.5/23-4M Eg Manual De Instrucciones

Refill fuel
DANGER
Danger of explosion! Only refill diesel oil or
light fuel oil. Inappropriate fuels, e.g. petrol,
must not be used.
ATTENTION
Risk of damage! Never operate device with
an empty fuel tank. The fuel pump will oth-
erwise be destroyed.
 Refill fuel.
 Close tank lock.
 Wipe off spilled fuel.

Refill detergent

DANGER
Risk of injury!
– Use Kärcher products only.
– Under no circumstances fill solvents
(petrol, aceton, diluting agent etc.)
– Avoid eye and skin contact.
– Observe safety and handling instruc-
tions by the detergent manufacturer.
Kärcher offers an individual cleaning
and care appliances program.
Your dealer will consult you gladly.
 Refill detergent.
Install the hand-spray gun, the jet
pipe, the nozzle and the high
pressure hose
Note: The EASY!Lock system joins com-
ponents with a quick-fasten thread solidly
and securely with just one turn.
Figure 5
 Join the spray lance with the trigger gun
and tighten until hand-tight
(EASY!Lock).
 Insert the high pressure nozzle onto the
spray lance.
 Install union nut and hand-tighten it
(EASY!Lock).
 Join the high-pressure hose with trigger
gun and high-pressure connection of
the appliance and tighten until hand-
tight (EASY!Lock).
12
All manuals and user guides at all-guides.com
For connection values refer to technical
specifications.
 Attach supply hose (minimum length
 Connect the supply hose to the water
Note: The supply hose and the hose clamp
are not included in the scope of delivery.
If you want to suck in water from an exter-
nal vessel, the following modification is
necessary:
Figure 6
 Open fill opening for system care.
 Release and remove the cover of the
 Remove water connection from the fine
 Unscrew the fine filter from the pump
Figure 7
 Remove the system care reservoir.
 Unscrew the top supply hose to the
Figure 8
 Connect the top supply hose at pump
 Replug the rinse line of the detergent
 Connect suction hose (minimum diame-
– Max. suck height: 1.6 ft (0.5 m)
Until the pump sucked in water, you should:
 Set the pressure/quantity regulation at
 Close the dosing valve for the detergent.
– 5
EN

Water connection

24.6 ft/7.5 m, minimum diameter 3/4")
to the water supply set by means of a
hose clamp.
connection point of the machine and at
the water supply point (for e.g. a tap).
Suck in water from vessel
system care.
filter.
head.
swimmer container.
head.
dosing valve.
ter 3/4") with filter (accessory) to the
water connection point.
the pump unit to maximum quantity.