Adjust Cleaning Temperature; Operation With Detergent; Eco Operation - Kärcher HDS 3.5/23-4M Eg Manual De Instrucciones

Ocultar thumbs Ver también para HDS 3.5/23-4M Eg:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Turning on the Appliance
 Set appliance switch to desired operat-
ing mode.
Indicator lamp for operational readiness
lights up.
The device starts briefly and turns off, as
soon as the working pressure is reached.
Note: If the indicator lamps for pump, burn-
er malfunction or engine are on during op-
eration, turn off the appliance immediately
and repair malfunction, refer to "Help with
malfunctions".
 Release the trigger gun. To do so, push
the safety catch towards the back.
When activating the hand spray gun the de-
vice switches back on.
Note: If no water comes out of the high
pressure nozzle, vent pump. Refer to "Help
with malfunctions - appliance is not building
up pressure".

Adjust cleaning temperature

 Set temperature regulator to desired
temperature.
86 °F/30 °C to 208 °F/98 °C:
– Clean with hot water.
212 °F/100 °C to 302 °F/150 °C
– Clean using steam.
 Replace the high-pressure nozzle
(stainless steel) with steam nozzle
(brass), (refer to "Using steam").
Set working pressure and flow rate
Pressure/quantity regulation of the
pump unit
 Turn the regulation spindle in a clock-
wise direction: Increase working pres-
sure (MAX).
 Turn the regulation spindle in an anti-
clockwise direction: Reduce working
pressure (MIN).
14
All manuals and user guides at all-guides.com
– For considerate treatment of the envi-
– The detergent must be suitable for the
 With support of the detergent dose
Note: Recommended values at the control
panel at maximum working pressure.
 Set pressure/temperature and deter-
Note: To prevent damage due to too much
pressure, always position high pressure ray
first from a greater distance towards object
to be cleaned.
Recommended cleaning method
– Loosen the dirt:
 Spray detergent economically and let it
– Remove the dirt:
 Spray off loosened dirt with the high
Removal of light contaminations and clear
rinse, i.e.: Gardening tools, terrace, tools,
etc.
 Set operating pressure according to
The appliance works in the most economi-
cal temperature range.
Note: The temperature can be regulated
up to 140 °F/60 °C.
– 7
EN

Operation with detergent

ronment use detergent economically.
surface to be cleaned.
valve set detergent concentration as
determined by the manufacturer.
Cleaning
gent concentration according to the sur-
face to be cleaned.
work for 1...5 minutes but do not let it
dry up.
pressure jet.
Operating with cold water
need.

Eco operation

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Hds 3.5/30-4m eaHds 4.0/20-4m eaHds 4.5/22-4m ea

Tabla de contenido