Rampage Trail Guard Front Bumper Instrucciones De Instalación página 2

1
Install fog lights.
4-Bolt fog lights: See Figure 2. Using the
provided 4mm hardware, bolt the provided
bracket to the bumper at the points shown at A.
Then bolt the fog light using the points shown at
B.
3-Bolt fog lights: See Figure 3. Using the
provided 4mm hardware, bolt the fog light using
the points shown at C.
Rampage fog lights: See Figure 4. Using the
hardware provided with the fog lights, bolt the
fog light using the points shown at D.
Figure 3
2
Place front bumper on the frame lining up holes.
Caution: 2 person lift.
C
Page 2 of 3
Figure 2
A
Figure 4
3
Install (2) nuts and (2) bolts with (2) washers and
(2) lock washers on each frame rail. Check bumper
adjustment before tightening hardware.
B
D